Pattern robe with the smell

Home gowns do not happen much. They should be in every family member. The family looks very nice, dressed in bathrobes made of the same fabric, but in different styles. You can also sew a few gowns by combining two or three different materials in harmony with each other. In each dressing gown, use all three fabrics, arranging them differently. The base is made of one material, and the edges, selection or cuffs are made of companion fabric, which is the basis for the shelf, back and sleeves of a bathrobe of another family member. In addition to the traditional terry, in which it is customary to wrap up after a shower, it is also good to have cozy options for a warm and cold season.dressing gown pattern

Should I sew a complicated model for the house?

The pattern of a dressing gown can be complicated, constitute up to ten parts - these are fantasy design sleeves, detachable yoke, and undercut details, assemblies, inserts made of finishing materials, etc. Such options are more suitable for experienced masters. Sewing such products for a long time is difficult, and, most importantly, fittings are needed, because a dressing gown of this kind should sit well on the figure. To make the right fit, you need an assistant.Is it worth it to spend so much effort if you have to sew from a sliding silk satin, plastic knitted velvet, cheap motley flannel or satin?

dress robe pattern

Home apparel professionals usually sew simple and comfortable non-zip gowns, with an emphasis on fabric. Bright and elegant fabric, as a rule, implies a concise style. This can be a long wrap-around bathrobe. The pattern is simple and, as they say, universal, that is suitable for different cases, just presented in our article.

dressing gown with a smell

Develop your own style

Before you buy a fabric, you need to decide what you see this thing - long or short, with sleeves or without, with a collar and pockets, etc. The pattern of the wrap with a smell will require more fabric than the pattern designed for buttoning or zipper . Matching must also be considered. Pattern dressing gown with the smell of a double-sided thick fabric such as terry may not have the details of the kit. The wide overlap of one shelf on the other and tied belt will provide the necessary comfort.

bathrobe pattern simple

Creating home clothes, do not become attached to the hard canons.This is just a good reason for experimenting and own discoveries. The collar can be made with folds at the neck. It will look voluminous and very original. And you can decorate a robe with ruffles on the bottom of the sleeves or along the side, grabbing the neck. You can make a dressing gown from thin crepe de chine by decorating it with expensive lace. It will still be cheaper than a similar item from the store.

bathrobe pattern simple

Requirements for home clothes

The main requirements to be observed in the manufacture of a dressing gown for relaxation are durable and non-crumbling seams, loose armholes of the sleeves, pockets and a good smell from one shelf to another. Hood often performs a decorative function, replacing the collar. It is sometimes made from a single rectangular part. The length of this rectangle is equal to the length of the neck of the back, plus two lengths of the upper parts of the shelves, to which it will be sewn from the beginning of one edge to the end of the other. The width of the rectangle is the height from the shoulder to the extreme point of the head, measured in a straight line, plus a few centimeters for the seams and freedom of fit.

dress robe pattern

Calculate the amount of fabric

The amount of fabric on the summer robe (simple pattern - two shelves and back,without sleeves) for women with a standard figure and a chest circumference not exceeding 100 cm, with a fabric width of at least 145 cm, equal to one product length plus 20 cm for a belt. This dressing gown can be made with lowered “kimono” sleeves, or you can make round armholes as for a set-in sleeve and process them with a undercloth piece or a ready-made oblique backing of a suitable color.

dressing gown pattern

It is very easy to sew a robe, the pattern of which consists of three simple details. The main difficulty is the purchase of fabric. In the store you need to be able to navigate with the type of material and decide what style it will be. Do you need pockets, what width is better to make a belt, not to add a thing with a hood or a collar, make a dressing gown with or without sleeves, and if with sleeves, what style. All these little things are directly related to the amount of fabric needed for sewing. Often you have to spend a few days before making a final decision. At the same time sewing the robe itself will take no more than two hours.

dressing gown size

We cut right on the fabric

You can buy an expensive silk fabric and indulge yourself with a luxurious man-made masterpiece in which you are not ashamed to leave the house to the nearest grocery store or take out the garbage. It will be a kind of dressing gown.Pattern for it can be made directly on the fabric. To do this, fold the cut along in half. The fold is the middle of the back. Set aside one-fourth of the circumference of the chest from the bend. plus an increase in loose fit and seams about 7 cm. Draw a line with chalk. At this stage, you can cut a groove for the neck and draw an inclined shoulder line. The neck of the back is cut 2 cm in front and 7 cm in front. The shoulder bevel is 2 cm. To find the point of the top of the shoulder, set aside 7 cm from the center of the back. On the front, the length of the shoulder should be exactly the same as backrest. All the rest - neckline and smell.

dressing gown with a smell

We focus on the standard figure of medium height and medium size. If you feel uncomfortable without breast darts, and our pattern of a size 38-44 dressing gown is small for you, then the necessary overlap in the chest area can be obtained by making small folds or assemblies from under the shoulder seam. They need no more than two or three centimeters of fabric on each side. If you plan to belt from the same fabric, then it should be cut from the bottom of the canvas strip of the desired width.After that, you can cut the material on the shelves and back.

dressing gown size

Guided by the proposed method, you can sew a thing for the child. The pattern of a children's dressing gown does not require any overlaps.

Make a bathrobe with long sleeves easy

Just make a robe with set-in sleeves. Details of the sleeves are rectangles. Their length is in accordance with the length of the arm, width is 35-45 centimeters, depending on personal preferences. When buying fabric, one sleeve length should be added to the length of the product. You can cut out rectangles by making the side that is sewn to the armhole in the form of a smooth arc. This sleeve sits much better.

sew a robe pattern

Knitted velvet - very comfortable material for home wear

For the cold season, you can sew a cozy robe made of knitted velvet "Nikki". Since this material is not wide (no more than 1 m 30 cm), it requires two product lengths. Knitted velvet wrinkles a little, does not require ironing and is suitable for both winter and summer.

The thing will look like a beautiful home dressing gown. The pattern of such a model is very simple. This is evident from the schemes presented to your attention.

Measured the circumference of the chest and hips. The basis is the largest figure. It is divided in half. The width of the back is equal to this value. For shelves to this figure should be made an increase of 4-10 cm, depending on the size. The darts can not be done, because the material and without them perfectly drape.

bathrobe do-it-yourself patterns

Knitted dressing gown

This is how a very simple and convenient pattern of a dressing gown resembling a sundress is made.

Fold your cut of fabric in half lengthwise. Fold - is the middle of the front and back. Fold again across. This fold is the shoulder line. Both folds mark with chalk lines. Spread out the fabric again, and in the place where the line of the shoulder and the middle of the front-back intersect, observing symmetry, draw a neckline. Cut out. You got a dressing gown. It remains only to turn over the cut of the neckline and to bend and hem all the cuts along the perimeter, as well as sew four ties on waist panels at the waist level. Two ties of the back are connected in front under the front panel, and the ties are folded in front of the back, cross and return forward, where they are tied to a knot or bow.

pattern baby dressing gown

This dressing gown pattern is best suited for a not very thick, soft, elastic fabric. Made of ordinary textiles, such a robe will drape much worse.However, even this very simple dressing-gown pattern can be improved if you decide to sew from inelastic fabric.

Dressing gown sundress of textile fabric

For such a case at the waist level should be four holes for the belt. The distance from the bottom edge should be the same. From the shoulder fold fold down 42 cm, and from the center of the front-back toward the edges - 30 cm. At the intersection of these lines, small holes should be cut no more than 3 cm in straightened form. There should be four such holes. Each of them should be treated with underlay details duplicated with adhesive gasket. This must be done to prevent the holes from expanding to an unaesthetic appearance.

dressing gown size

The pattern of the dressing gown made by such method assumes the complete absence of connecting seams. Detail one. Side seams are absent. Excess fabric on the sides is taken and fastened with ties. Folds with high cuts are obtained.

Kimono

This model is a bathrobe with cap sleeves. The pattern presented in our article demonstrates that the smell is formed due to the wide strap that goes along the sides and the neck.In a traditional Japanese dressing gown, it is cut out along a share thread and is made double. Sometimes it is quilted with several parallel lines of lines. One side of the plank from the inside should be duplicated with adhesive gasket. If the width of the fabric allows, you can limit yourself to one length, plus an increase on the wide sleeve, bar and belt. Such dressing gown can be sewed from any fabric.

dressing gown pattern

Final finish

Try to sew a dressing gown with their own hands. The patterns that we picked up are suitable not only for textile materials, but also for knitwear. The processing of both of them is the obscuring of internal cuts from shedding and blooming, as well as the edging of the outer edges. For this purpose, it is very convenient to use a ready-made oblique inlay or a double elastic band with a perforated fold. The bottom of the sleeves and hem can not be edged, but bend first on one, and then on three centimeters, and hem a secret stitch. If the fabric is loose, then each cut is recommended to be edged with an oblique inlay.

Related news

Pattern robe with the smell image, picture, imagery


Pattern robe with the smell 25


Pattern robe with the smell 66


Pattern robe with the smell 20


Pattern robe with the smell 83


Pattern robe with the smell 45


Pattern robe with the smell 52


Pattern robe with the smell 52


Pattern robe with the smell 36