Features and benefits of cast discs
It's no secret that most ownersModern cars install only cast wheels on their cars. And they are not mistaken in their choice. This kind of light alloy wheel has a lot of advantages that other disc models can not boast of. This article will tell you about the most important advantages and features of light alloys (cast discs).
A light weight
Alloy wheels are made from specialalloys, as a result of which their mass is significantly reduced (by 30-40% less than for stamped products). Due to this factor, there is a noticeable decrease in the load on the suspension parts, and as a consequence, its longer service life. A small weight of products positively affects comfort - during driving, the visibility of pits and bumps is significantly reduced. The handling of the car is also noticeably improving (even in motorsports most of the discs are made from light alloys). If you have a desire to purchase high-quality products, you can order the alloy wheels on the page & nbsp;
One of the main advantages of cast discsit is considered their high strength - most products are made of aluminum, and this metal is known to be very light and able to withstand enormous loads. With minor and medium impacts, the disc remains perfectly intact, and only when it collides at high speeds can it burst. Recently, discs made of aluminum, magnesium and titanium alloys have been manufactured, which gives them additional strength and resistance to loads.
Improved operation of the brake system
Most models of cast discs have thinNeedles and sufficiently large gaps between them. Thanks to this feature, a good air flow to the braking system of the car is provided, which has a favorable effect on its cooling and reliability.
Resistance to external influences
If forged and forged products are afraideffects of moisture and are able to completely break down within 2-3 years, then light alloy wheels are deprived of this shortcoming. The special aluminum alloy from which the discs are made is very resistant to chemical agents and liquids. Even in the event of deep cracks and scratches on the discs, rust does not form, which can damage the integrity of the structure. Some models are also covered with a special protective layer (polymer).
A small mass of light alloy wheels positively affects their inertness, which gives the following advantages:
- Improves the acceleration of the car
- Reduces the amount of fuel consumed
- The braking distance becomes noticeably smaller
- Reduces the load on the transmission, engine, braking system and steering, which ultimately prolongs their service life and reduces the cost of possible repairs
- Deformation of the car body also decreases
In addition to all the above advantages, alloy wheels can give the car a modern and updated look.